AEP100-Analog Device Chipsets
Features
|
 |
Electrical Specifications @ 25°C
Operating Temperature -40° to +85°C| Part Number |
Package | IC Driver | Turns Ratio ±2% Line : IC |
LP (mH) |
LL (µH) Max. |
CWW (pF) Max. |
DCR (Ohms) Max. Line / IC |
THD (Linearity) Typical | Longitudinal Balance Min. |
Insertion Loss Max. |
Frequency Response Max. |
Isolation Voltage (Vrms) |
| AEP100-T | TH | AD20MSP910 CO/CPE AD20MSP91B CO/CPE |
1:1 | 5,0 ±10% |
25 | 60 | 3,00 / 3,00 | -80dB 30kHz |
-46dB 10kHz-1,1MHz |
0,5dB 300kHz |
1,0dB 30kHz -1,1MHz |
1.500 |
| AEP100-S | SMD | |||||||||||
| AEP110-T | TH | AD20MSP91B CO | 1,27:1 | 3,22 ±10% |
7,5 | 50 | 2,45 / 2,00 | -80dB 30kHz |
-50dB 30kHz-1,1MHz |
0,5dB 100kHz |
1,0dB 30kHz -1,1MHz |
|
| AEP110-S | SMD | |||||||||||
| AEP120-T | TH | AD20MSP930 CO | 1,11:1 | 2,03 Min. |
10 | 60 | 1,30 / 1,50 | -80dB 30kHz |
-50dB 30kHz-1,1MHz |
0,5dB 100kHz |
1,0dB 30kHz -1,1MHz |
|
| AEP120-S | SMD | |||||||||||
| AEP130-T | TH | AD20MSP930 CPE | 1,2:1 | 2,42 Min. |
10 | 50 | 1,30 / 1,50 | -80dB 30kHz |
-50dB 30kHz-1,1MHz |
0,5dB 100kHz |
1,0dB 30kHz -1,1MHz |
|
| AEP130-S | SMD | |||||||||||
| AEP140-T | TH | AD20MSP910 CO/CPE AD20MSP91B CO/CPE |
1:1 | 5,0 ±10% |
25 | 60 | 3,0 / 3,0 | -80dB 30kHz |
-40dB 30kHz-1,1MHz |
0,5dB 100kHz |
1,0dB 30kHz -1,1MHz |
|
| AEP140-S | SMD |
Nordtek Denmark - current sensor, ei30, ee20, pcb transformer, vergossen, plug in transformer, topswitch, simple switcher
Nordtek Com - transformer design, magnetics, impedance, transformer ac, toroids
strommessung, netztrafo, power supply,voltage transformer, telecom transformer, pulse
current sense transformer, drossel, current sense transformer, inductive, ferrite, kleintransformatoren
inductor, inductance, 3c85, 3f3, power transformer, toroid, 50/60hz, line transformer, emi
electronic starter, flicker starter, fluorescent lamps, safety starter, lamp starter, glow starters, tubestarter, rapid, ts8, sunbed, halogen transformer